Product ID:EA 9814 NA 50 MIL
MSDS Date:06/10/1988
FSC:8040
NIIN:01-280-4793
MSDS Number: BKYXV

Emergency Phone: (415) 687-4201

Info Phone: (415) 687-4201

Preparer: SUZANNE FRANZ

Cage: 1JB33

Telephone: 202-483-7616

Cage: 33564

EPOXY RESIN SYSTEM

SILICON DIOXIDE

CAS: 7631-86-9

RTECS: VV3100000

Fraction By Weight: <30%

OSHA PEL 80 MG/CUM

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: IRRITATION, ALLERGIC REACTIONS,
RASH, SENSITIZATION, & DERMATITIS. EYES/INHALATION/INGESTION:
IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: IRRITATION, ALLERGIC REACTIONS, RASH,
SENSITIZATION, & DERMATITIS. EYES/INHALATION/INGESTION: IRRITATION.

First Aid:EYES: FLUSH W/PLENTY OF WATER. SKIN: WASH THOROUGHLY W/SOAP &
WATER, HAND CLEANERS. DON'T USE SOLVENTS. INHALATION: REMOVE TO
FRESH AIR. INGESTION: OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point Method:TOC
Flash Point:>300F
Extinguishing Media:DRY CHEMICAL, HALON FIRE EXTINGUISHER, WATER SPRAY,
FOAM, OR FOG.
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS IN
CONFINED AREAS.

Spill Release Procedures:WEAR PROTECTIVE EQUIPMENT. SCRAPE UP &
TRANSFER TO METAL CONTAINER. WIPE UP REMAINING RESIDUE W/SOLVENTS,
OBSERVING SOLVENT FLAMMABILITY CAUTIONS.

Handling and Storage Precautions:KEEP COOL IN ACCORDANCE W/LABEL
INSTRUCTIONS. SHELF LIFE 12 MONTHS AT 0 F. FOLLOW RECOMMENDED
CURING SCHEDULE.
Other Precautions:AVOID CONTACT W/SKIN, EYES & CLOTHING.
READ/UNDERSTAND ALL SAFETY PRECAUTIONS.

Respiratory Protection:NOT NEEDED W/GOOD INDUSTRIAL VENTILATION.
Ventilation:LOCAL EXHAUST: RECOMMENDED
Protective Gloves:IMPERVIOUS PLASTIC, RUBBER
Eye Protection:SAFETY GLASSES, GOGGLES
Other Protective Equipment:PROTECTIVE CLOTHING
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health

Boiling Pt:B.P. Text:DECOMPOSES
Vapor Pres:<0.01
Vapor Density:0
Spec Gravity:>1
Solubility in Water:INSOLUBLE
Appearance and Odor:BLUE; SEMI-SOLID FILM

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, LEWIS OR MINERAL ACIDS.
Hazardous Decomposition Products:CO, NITROGEN OXIDES, ACIDS,
UNDETERMINED ORGANICS, DENSE SMOKE, & TOXIC GASES.
Conditions to Avoid Polymerization:HEAT UNLESS CURING SURFACES TO BE
BONDED. FAILURE OF CAUTION MAY RESULT IN EXCESSIVE HEAT BUILD-UP
W/TOXIC GASES.

Waste Disposal Methods:DISPOSE OF AS HAZARDOUS WASTE ACCORDING TO DOT
HAZARD CLASS. IF NOT REGULATED BY DOT, DISPOSE OF AS ORM-E IN
ACCORDANCE W/LOCAL, STATE, & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.